 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ALUMINUM ELECTROLYTIC CAPACITORS UB Chip Type, High Reliability series WH High Temperature Chip type, high temperature range, for +125C use. Applicable to automatic mounting machine using carrier tape. Adapted to the RoHS directive (2002/95/EC). Reflow CJ Added ESR specification at - 40C UB High Temperature UX Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan Performance Characteristics - 40 ~ +125C 10 ~ 50V 10 ~ 330F 20% at 120Hz, 20C After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4(A) , whichever is greater. Measurement frequency : 120Hz, Temperature : 20C Rated voltage (V) tan (MAX.) 10 0.32 16 0.24 10 12 25 0.21 16 8 25 6 35 0.18 35 4 50 0.18 50 4 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C Endurance After 2000 hours' (8 x 6.2 : 1000 hours) application of rated voltage at 125C, capacitors meet the characteristic requirements listed at right. Capacitance change tan Leakage current Within 30% of initial value 300% or less of intial specified value Initial specified value or less Shelf Life Resistance to soldering heat Marking After storing the capacitors under no load at 125C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250C Capacitance change Within 10% of initial value for 30 seconds. After removing from the hot plate and restored tan Initial specified value or less at room temperature, they meet the characteristic requirements Leakage current Initial specified value or less listed at right. Black print on the case top. (8 x 6.2) Chip Type A0.2 A0.2 125C Marking Capacitance Lot No. C0.2 0.5MAX. Plastic platform 0.3MAX. Voltage fD0.5 Positive Type numbering system (Example : 10V 100F) UUB 1 A 1 0 1 MCL 1GS Configuration Capacitance tolerance (20%) fD L Code Rated Capacitance (100mF) 8 6.2 CL 8 10 NL Rated voltage (10V) 10 10 NL Series name Type Taping code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 B0.2 A2E 100 10V Trade mark L0.3 (8 x 10, 10 x 10) H C0.2 A0.2 A0.2 125C Marking Capacitance Lot No. Voltage Trade mark fD0.5 0.5MAX. Plastic platform 0.3MAX. B0.2 E Negative Positive fD L0.5 Pressure relief vent Dimensions Cap.(F) V Code H Negative A B C E L H L 86.2 810 1010 3.3 2.9 3.2 8.3 8.3 10.3 8.3 8.3 10.3 2.3 3.1 4.5 6.2 10 10 0.5 ~ 0.8 0.8 ~ 1.1 0.8 ~ 1.1 25 1E (mm) A2E 330 10V 10 1A E 16 1C 35 1V 8 x 6.2 8 x 6.2 8 x 10 10 x 10 50 1H 24 38 46 58 Rated ripple 10 22 33 47 100 220 330 100 220 330 470 101 221 331 8 x 6.2 8 x 10 10 x 10 58 90 112 8 x 10 10 x 10 66 102 8 x 6.2 8 x 10 10 x 10 48 74 116 8 x 6.2 8 x 10 10 x 10 44 52 80 Case size D x L (mm) Rated Ripple (mArms) at 125C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please select UH(p.78) series if high CV products are required. Please refer to page 3 for the minimum order quantity. CAT.8100V |
Price & Availability of UUB1V470MCL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |